EN| DE| NL
Inloggen
Winkelwagen

Uw winkelwagen is leeg

  EN| DE| NL
Home     ELTIM XO-1, universele filter print 100x160mm, 70um vertind
Price per piece
ELTIM XO-1, universele filter print 100x160mm, 70um vertind
Price per piece
ELTIM XO-1, universele filter print 100x160mm, 70um vertind<br />Price per piece

ELTIM XO-1, universele filter print 100x160mm, 70um vertind
Price per piece

Bijna alle gebruikelijke componenten passen. 6/6dB serie, 12dB HP of LP, 6/6dB BP


Deze printplaat hebben we eigenlijk voor ons 6/6dB seriefilter ontwerp ontwikkeld zoals we in de meeste van onze zelfbouwontwerpen toepassen. Gaandeweg bleek echter dat we het met enkele kleine aanpassingen ook voor diverse andere filters geschikt konden maken.
Download hier Uitleg en layout  om alle mogelijkheden te zien. De professionele print is vertind en voorzien van een soldeermasker en opdruk met component locatie's.  


€ 19.95

Kortingsschema:

  • 4 = 10 %
  • 12 = 20 %
  • 25 = 30 %

Artikelcode: XO1

With our XO-1 board we can build all kinds of crossovers:

- 6/6dB serial 2-way crossovers
- 6/6dB serial sub/sat crossovers
- 6 or 12dB low pass crossover
- 6 or 12dB high pass crossover
- 6/6dB midrange crossover
- 12dB subwoofer crossover


We can build crossovers for you while using this XO-1 board.
Just send us a sketch with component values and types and
we wil respond with an offer.
You could also use the form listed in the info bulletin.
We can mount INTERTECHNIK and MUNDORF components.

Some examples:
6/6db serial crossover as we use it in most of our own designs.
Wire- or foilcoil and up to three capcitors (here MCap400+Tinfoil+0,01uF)
RC circuit over the woofer and RC + RCL circuit over the tweeter.

12dB High Pass filter
Foil or wire coil and multiple or one large (+ small one, here RIFA 0,01uF) capacitor
RC and RCL circuit over the tweeter.

Subwoofer 12dB crossover
Actually, here just a bunch of 6 capacitors mounted in parallel, but:
2x bipolar mounted antiparallel
2x MCap400 mounted antiparallel
1x  fine Supreme Oil for detail
1x  0,01uF because some believe it even has to be in circuits like this.
The coil (example here...) is mounted external over the screw connector.

And we can go on and on with so many examples.
So, have some of these boards and you can build about any crossover.